Clean loose glue

Step 5:

The old glue needs to be cleaned from the stub and, if possible, the socket. 

Scrape or sand off old glue

Step 6:

Sandpaper and a chisel or screwdriver will help.

Reset leg into seat

Step 7:

Dry fit the joint back together.  It should fit snugly.  If the joint doesn't fit firmly together, I normally use small pieces of wood to wedge it tight.  Disassemble the joint, glue it back together and clamp it with a long bar clamp or a bungee cord.

1 - 2

Printer friendly page

E-mail this page to a friend

Please note:  We consider all of the information on this site to be reliable.   We strive to provide the best home improvement and repair content possible, but we assume no liability for the information contained herein. [Full Disclaimer]  
All information contained is © Copyright 2000 - InsideSpaces.com, Inc.           Click here to read our privacy statement.